Productivity — Model 65 Systems

Tables show pounds of raw, headless shrimp peeled per hour for each peeling station

• The larger the shrimp, the greater the productivity in pounds.
• Column 1 shows the maximum speed of 5,000 per hour.
• Column 2 shows actual, achievable, experience based productivity of 4,500 per hour.
• Column 2 speeds assume shrimp are delivered to the peeling stations, operators and maintenance team have experience.
• Model 65 runs at 2 speeds, 5,000 and 4,000 per hour. The slower speed is intended for training.
• Accuracy of shrimp placement is more important than speed when preparing a quality product.

Productivity Shown In Pounds per Hour

Water Consumption

• Each unit has a built-in water valve to minimize water use
• 30 gallons per hour at 30 pounds per square inch pressure, or
• 35 gallons per hour at 40 pounds per square inch pressure typical.
• 0.11 cubic meters at 2 bar pressure, or
• 0.14 cubic meters at 3 bar pressure typical.
• Some peeling system configurations use additional water.

Electric Power Consumption

• Maximum power draw follows depends on supply
• 1 amp at 460 volt, three phase, 50 Hertz
• 2 amps at 230 volt, three phase, 50 Hertz
• 2.7 amps at 230 volt, single phase, 60 Hertz
• 5.4 amps at 115 volt, single phase, 60 Hertz

Productivity In Kilograms per Hour